November 3, 2026 Absentee Voting Information: VOTING BY ABSENTEE BALLOT General Election November 3, 2026   VILLAGE OF WALES                      VILLAGE OF DOUSMAN                TOWN OF OTTAWA  Any qualified elector who is unable or unwilling to appear at the polling place on election day may request to vote an absentee ballot.  A qualified elector is any U.S. citizen, who will be 18 years of age or older on election day, and has resided in the ward or municipality where he or she wishes to vote for at least 28 days before the election.  The elector must also be registered in order to receive an absentee ballot.  Photo ID must be provided before an absentee ballot may be issued.  TO OBTAIN AN ABSENTEE BALLOT YOU MUST MAKE A REQUEST IN WRITING. Contact your municipal clerk and request that an application for an absentee ballot be sent to you.  You may also request an absentee ballot by letter.  Your written request must list your voting address within the municipality where you wish to vote, the address where the absentee ballot should be sent, if different, and a copy of Photo ID.  You may make an application for an absentee ballot by mail-in person or at myvote.wi.gov. Special absentee voting application provisions apply to electors who are indefinitely confined to home or care facility, in the military, hospitalized, or serving as a sequestered juror.  If this applies to you, contact the municipal clerk. You can also personally go to the clerk’s office, complete a written application, show Photo ID and vote an absentee ballot.  VILLAGE OF WALES                                                VILLAGE OF DOUSMAN Gail Tamez, Clerk                                                        John Roth, Administrator/Clerk/Treasurer 129 W. Main Street                                                    118 S. Main Street Wales, WI 53183                                                         Dousman, WI 53118 262-968-3968                                                             262-965-3792 Monday – Thursday                                                    Monday & Wednesday 8:00 a.m. - 2:30 p.m. 8:00 a.m. to 3:00 p.m.                                                 Friday 8:00 a.m. – noon Friday                                                                          Tuesday & Thursday 8:00 a.m. - 4:00 p.m. 8:00 a.m. to 12:00 p.m.                                                                                                                                    TOWN OF OTTAWA  Lori Geyman, Clerk                                                     W360 S3337 State Road 67                                           Dousman, WI 53118                                                     262-965-3228                                                                       Monday – Thursday 8:00 a.m. – 4:00 p.m.                                                         Friday – 8:00 a.m. to 12:00 noon THE DEADLINE FOR MAKING APPLICATION TO VOTE ABSENTEE BY MAIL IS THURSDAY OCTOBER 29, 2026. HOURS VARY BY MUNICIPALITY, PLEASE SEE ABOVE FOR INDIVIDUAL HOURS. (MILITARY ELECTORS SHOULD CONTACT THE MUNICIPAL CLERK REGARDING THE DEADLINES FOR REQUESTING OR SUBMITTING AN ABSENTEE BALLOT. THE FIRST DAY TO VOTE AN ABSENTEE BALLOT IN THE CLERK’S OFFICE IS TUESDAY OCTOBER 20, 2026.  THE DEADLINE FOR VOTING AN ABSENTEE BALLOT IN THESE MUNICIPALIIES IN THE CLERK’S OFFICE IS ON FRIDAY OCTOBER 30, 2026.  CONTACT YOUR CLERK’S OFFICE FOR SPECIFIC VOTING HOURS ON FRIDAY OCTOBER 30, 2026 THE MUNICIPAL CLERK WILL DELIVER VOTED BALLOTS RETURNED ON OR BEFORE ELECTION DAY TO THE PROPER POLLING PLACE BEFORE THE POLLS CLOSE ON TUESDAY NOVEMBER 3, 2026.  

TEST TW WEATHER

2024 CCR REPORT

2024 Consumer Confidence Report Data
DOUSMAN WATER UTILITY, PWS ID: 26801973

Este informe contiene información importante acerca de su agua potable. Haga que alguien lo traduzca para usted, o hable con alguien que lo entienda.

Dlaim ntawv tshaabzu nuav muaj lug tseemceeb heev nyob rua huv kws has txug cov dlej mej haus. Kuas ib tug paab txhais rua koj, los nrug ib tug kws paub lug thaam.

Water System Information

If you would like to know more about the information contained in this report, please contact Joe Kitelinger at (262) 965-3302.

Opportunity for input on decisions affecting your water quality

6 PM, 2nd Monday of every Month

Health Information

Drinking water, including bottled water, may reasonably be expected to contain at least small amounts of some contaminants. The presence of contaminants does not necessarily indicate that water poses a health risk. More information about contaminants and potential health effects can be obtained by calling the Environmental Protection Agency’s safe drinking water hotline (800-426-4791).

Some people may be more vulnerable to contaminants in drinking water than the general population. Immuno-compromised persons such as persons with cancer undergoing chemotherapy, persons who have undergone organ transplants, people with HIV/AIDS or other immune systems disorders, some elderly, and infants can be particularly at risk from infections. These people should seek advice about drinking water from their health care providers. EPA/CDC guidelines on appropriate means to lessen the risk of infection by cryptosporidium and other microbial contaminants are available from the Environmental Protection Agency’s safe drinking water hotline (800-426-4791).

Source(s) of Water

Source ID

Source

Depth (in feet)

Status

1

Groundwater

1125

Active

2

Groundwater

1094

Active

To obtain a summary of the source water assessment please contact, Joe Kitelinger at (262) 965-3302.

Educational Information

The sources of drinking water, both tap water and bottled water, include rivers, lakes, streams, ponds, reservoirs, springs and wells. As water travels over the surface of the land or through the ground, it dissolves naturally occurring minerals and, in some cases, radioactive material, and can pick up substances resulting from the presence of animals or from human activity.

Contaminants that may be present in source water include:

  • Microbial contaminants, such as viruses and bacteria, which may come from sewage treatment plants, septic systems, agricultural livestock operations and wildlife.
  • Inorganic contaminants, such as salts and metals, which can be naturally- occurring or result from urban stormwater runoff, industrial or domestic wastewater discharges, oil and gas production, mining or farming.
  • Pesticides and herbicides, which may come from a variety of sources such as agriculture, urban stormwater runoff and residential uses.
  • Organic chemical contaminants, including synthetic and volatile organic chemicals, which are by-products of industrial processes and petroleum production, and can also come from gas stations, urban stormwater runoff and septic systems.
  • Radioactive contaminants, which can be naturally occurring or be the result of oil and gas production and mining activities.

In order to ensure that tap water is safe to drink, EPA prescribes regulations that limit the amount of certain contaminants in water provided by public water systems. FDA regulations establish limits for contaminants in bottled water, which shall provide the same protection for public health.

Definitions

Term

Definition

AL

Action Level: The concentration of a contaminant which, if exceeded, triggers treatment or other requirements which a water system must follow.

HA and HAL

HA: Health Advisory. An estimate of acceptable drinking water levels for a chemical substance based on health effects information. HAL: Health Advisory Level is a concentration of a contaminant which, if exceeded, poses a health risk and may require a system to post a public notice. Health Advisories are determined by US EPA.

HI

HI: Hazard Index: A Hazard Index is used to assess the potential health impacts associated with mixtures of contaminants. Hazard Index guidance for a class of contaminants or mixture of contaminants may be determined by the US EPA or Wisconsin Department of Health Services. If a Health Index is exceeded a system may be required to post a public notice.

Level 1 Assessment

A Level 1 assessment is a study of the water system to identify potential problems and determine, if possible, why total coliform bacteria have been found in our water system.

Level 2 Assessment

A Level 2 assessment is a very detailed study of the water system to identify potential problems and determine, if possible, why an E. coli MCL violation has occurred or why total coliform bacteria have been found in our water system, or both, on multiple occasions.

MCL

Maximum Contaminant Level: The highest level of a contaminant that is allowed in drinking water. MCLs are set as close to the MCLGs as feasible using the best available treatment technology.

MCLG

Maximum Contaminant Level Goal: The level of a contaminant in drinking water below which there is no known or expected risk to health. MCLGs allow for a margin of safety.

MFL

million fibers per liter

MRDL

Maximum residual disinfectant level: The highest level of a disinfectant allowed in drinking water. There is convincing evidence that addition of a disinfectant is necessary for control of microbial contaminants.

MRDLG

Maximum residual disinfectant level goal: The level of a drinking water disinfectant below which there is no known or expected risk to health. MRDLGs do not reflect the benefits of the use of disinfectants to control microbial contaminants.

mrem/year

millirems per year (a measure of radiation absorbed by the body)

NTU

Nephelometric Turbidity Units

pCi/l

picocuries per liter (a measure of radioactivity)

ppm

parts per million, or milligrams per liter (mg/l)

ppb

parts per billion, or micrograms per liter (ug/l)

ppt

parts per trillion, or nanograms per liter

ppq

parts per quadrillion, or picograms per liter

PHGS

PHGS: Public Health Groundwater Standards are found in NR 140 Groundwater Quality. The concentration of a contaminant which, if exceeded, poses a health risk and may require a system to post a public notice.

RPHGS

RPHGS: Recommended Public Health Groundwater Standards: Groundwater standards proposed by the Wisconsin Department of Health Services. The concentration of a contaminant which, if exceeded, poses a health risk and may require a system to post a public notice.

SMCL

Secondary drinking water standards or Secondary Maximum Contaminant Levels for contaminants that affect taste, odor, or appearance of the drinking water. The SMCLs do not represent health standards.

TCR

Total Coliform Rule

TT

Treatment Technique: A required process intended to reduce the level of a contaminant in drinking water.

Detected Contaminants

Your water was tested for many contaminants last year. We are allowed to monitor for some contaminants less frequently than once a year. The following tables list only those contaminants which were detected in your water. If a contaminant was detected last year, it will appear in the following tables without a sample date. If the contaminant was not monitored last year, but was detected within the last 5 years, it will appear in the tables below along with the sample date.

Disinfection Byproducts

Contaminant (units)

Site

MCL

MCLG

Level Found

Range

Sample Date (if prior to 2024)

Violation

Typical Source of Contaminant

HAA5 (ppb)

DBP1

60

60

0

0

 

No

By-product of drinking water chlorination

TTHM (ppb)

DBP2

80

0

0.2

0.2

 

No

By-product of drinking water chlorination

Inorganic Contaminants

Contaminant (units)

Site

MCL

MCLG

Level Found

Range

Sample Date (if prior to 2024)

Violation

Typical Source of Contaminant

ARSENIC (ppb)

 

10

n/a

4

2 – 4

3/22/2023

No

Erosion of natural deposits; Runoff from orchards; Runoff from glass and electronics production wastes

BARIUM (ppm)

 

2

2

0.099

0.073 – 0.099

3/22/2023

No

Discharge of drilling wastes; Discharge from metal refineries; Erosion of natural deposits

FLUORIDE (ppm)

 

4

4

0.2

0.2 – 0.2

3/22/2023

No

Erosion of natural deposits; Water additive which promotes strong teeth; Discharge from fertilizer and aluminum factories

NICKEL (ppb)

 

100

 

2.1000

0.0000 – 2.1000

3/22/2023

No

Nickel occurs naturally in soils, ground water and surface waters and is often used in electroplating, stainless steel and alloy products.

SODIUM (ppm)

 

n/a

n/a

13.00

3.40 – 13.00

3/22/2023

No

n/a

 

Contaminant (units)

Action Level

MCLG

90th Percentile Level Found

Range

# of Results

Sample Date (if prior to 2024)

Violation

Typical Source of Contaminant

COPPER (ppm)

AL=1.3

1.3

0.7600

0.1000 – 1.0000

0 of 10 results were above the action level.

9/20/2023

No

Corrosion of household plumbing systems; Erosion of natural deposits; Leaching from wood preservatives

LEAD (ppb)

AL=15

0

2.30

0.00 – 3.80

0 of 10 results were above the action level.

9/20/2023

No

Corrosion of household plumbing systems; Erosion of natural deposits

PFAS Contaminants with a Recommended Health Advisory Level

Perfluoroalkyl and polyfluoroalkyl substances (PFAS) are a large group of human-made chemicals that have been used in industry and consumer products worldwide since the 1950. The following table list PFAS contaminants which were detected in your water and that have a Recommended Public Health Groundwater Standard (RPHGS) or Health Advisory Level (HAL). There are no violations for detections of contaminants that exceed the RPHGS or HAL. The RPHGS are levels at which concentrations of the contaminant present a health risk and are based on guidance provided by the Wisconsin Department of Health Services.

Note: The recommended health-based levels in the table below were in effect in 2024. These levels were revised by WDHS in 2025. They can be found here https://www.dhs.wisconsin.gov/water/gws.htm.

 

Typical Source of Contaminant

Drinking water is one way that people can be exposed to PFAS. In Wisconsin, two-thirds of people use groundwater as their drinking water source. PFAS can get in groundwater from places that make or use PFAS and release from consumer products in landfills.

Contaminant (units)

Site

RPHGS or HAL (PPT)

Level Found

Range

Sample Date (if prior to 2024)

PFBS (ppt)

 

450000

0.37

0.00 – 0.37

4/12/2023

PFHXS (ppt)

 

40

0.60

0.00 – 0.60

4/12/2023

Radioactive Contaminants

Contaminant (units)

Site

MCL

MCLG

Level Found

Range

Sample Date (if prior to 2024)

Violation

Typical Source of Contaminant

GROSS ALPHA, EXCL. R & U (pCi/l)

 

15

0

9.4

3.7 – 15.5

 

No

Erosion of natural deposits

RADIUM, (226 + 228) (pCi/l)

 

5

0

4.8

4.3 – 5.3

 

No

Erosion of natural deposits

GROSS ALPHA, INCL. R & U (n/a)

 

n/a

n/a

9.5

3.8 – 15.6

 

No

Erosion of natural deposits

COMBINED URANIUM (ug/l)

 

30

0

0.3

0.2 – 0.3

 

No

Erosion of natural deposits

Additional Health Information

Lead can cause serious health effects in people of all ages, especially pregnant people, infants (both formula-fed and breastfed), and young children. Lead in drinking water is primarily from materials and parts used in service lines and in home plumbing. Dousman Water Utility is responsible for providing high quality drinking water and removing lead pipes but cannot control the variety of materials used in the plumbing in your home. Because lead levels may vary over time, lead exposure is possible even when your tap sampling results do not detect lead at one point in time. You can help protect yourself and your family by identifying and removing lead materials within your home plumbing and taking steps to reduce your family’s risk. Using a filter, certified by an American National Standards Institute accredited certifier to reduce lead, is effective in reducing lead exposures. Follow the instructions provided with the filter to ensure the filter is used properly. Use only cold water for drinking, cooking, and making baby formula. Boiling water does not remove lead from water. Before using tap water for drinking, cooking, or making baby formula, flush your pipes for several minutes. You can do this by running your tap, taking a shower, doing laundry or a load of dishes. If you have a lead service line or galvanized requiring replacement service line, you may need to flush your pipes for a longer period. If you are concerned about lead in your water and wish to have your water tested, contact Dousman Water Utility (Joe Kitelinger at (262) 965-3302). Information on lead in drinking water, testing methods, and steps you can take to minimize exposure is available at https://www.epa.gov/safewater/lead.

Additional Information on Service Line Materials

We are required to develop an initial inventory of service lines connected to our distribution system by October 16, 2024 and to make the inventory publicly accessible. You can access the service line inventory here/by: www.villageofdousman.com, Village message board or message board at post office

Other Compliance

Other Drinking Water Regulations Violations

Description of Violation

Date of Violation

Date Violation Resolved

Failed to develop an initial inventory for service line materials that meets federal requirements and failed to make initial lead service line inventory publicly accessible

10/17/2024

6/5/2025

Actions Taken

We did have lot of the leg work done with the lead line inventory and it was mostly due to improperly submitting not knowing the correct process for submitting it correctly, also our system contains less than 4% lead lines

 

Exposure to lead in drinking water can cause serious health effects in all age groups. Infants and children can have decreases in IQ and attention span. Lead exposure can lead to new learning and behavior problems or exacerbate existing learning and behavior problems. The children of women who are exposed to lead before or during pregnancy can have increased risk of these adverse health effects. Adults can have increased risks of heart disease, high blood pressure, kidney or nervous system problems.

 

Copper is an essential nutrient, but some people who drink water containing copper in excess of the action level over a relatively short amount of time could experience gastrointestinal distress. Some people who drink water containing copper in excess of the action level over many years could suffer liver or kidney damage. People with Wilsons Disease should consult their personal doctor.

 

We failed to develop an inventory that meets all federal requirements and/or to make the inventory publicly accessible.